Remote Control

• Roksan RMX Learning System Remote Handset
  
  The Roksan RMX-108 Learning System Remote Handset is a digital remote control that is easy to use and enables you to control almost all of the Roksan family of products and most other audio and video products equipped with an infrared (IR) remote receiver.
  This device is pre-programmed for Kandy and Caspian CD, Amplifier and Tuner.
  
  A user-friendly touch screen panel plus an array of hard keys also enables you to control two additional devices, such as VCRs, DVDs, TVs, and satellite receivers.
  The hard and touch screen keys include most legends required to operate CD players, Amplifiers and Tuners. There are some extra legends to assist programming for frequently used commands for DVDs etc.
  
  Note: There are numerous legends used for full operation of DVDs, TVs, Receivers and alike. It is impossible to incorporate all such legends in one remote handset.
  You can quickly configure the remote control for each additional device in your household or office, using the innovative “learning eye” feature. The advanced macro function enables you to initiate a chain of up to 60 commands with the touch of a single key.
  Easy to use, the RMX-108 Learning System Remote Handset provides you with a complete central control solution.
  NOTE: This manual helps you learn how to use the advanced features of the remote handset. It does not explain how to use the functions for your additional devices. Please refer to your device’s user manual for information related to your device.
  
  Priliminary K2 Remote Handset User Manual (RMX-108)
  PDF 1.69 MB (Learning codes)
  PDF 328 KB (Resetting factory defaults)
  

High Definition Cables (HDC)

• Digital interconnect
  
  HDC-01D
  The HDC-01D high-definition digital interconnect cable is designed utilising a solid copper inner conductor, aluminium polyester tape for 100% shielding and tinned copper drain wires for uniform reliable grounding. The insulated 75 Ohm BNC connectors have gold plated centre pin for optimised digital signal transmission. The ground and signal contact are airtight to ensure long term reliable high frequency signal transmission.
  
  Click here to see the image of HDC-01D
  
  

• Analogue interconnect
  
  HDC-02A
  The HDC-02A high-definition signal interconnect cable is designed utilising 4 conductors of low noise oxygen free copper for signal transmission. There are 2 for 'Hot (+ve)' and 2 for 'Return (-ve)' conductors twisted and wrapped with natural cotton filler and paper separator to minimise electrostatic build up. Minimal loop area between the conductors ensures optimum signal to noise ratio and minimal susceptibility to electromagnetic interference. Each conductor is made of 40 strands of 0.1mm diameter high purity oxygen free copper and the outer shield braid is made of 128 strands of 0.1mm high purity tinned oxygen free copper to ensure 98% screening coverage. Outer PVC / Neoprene sleeve is highly flexible and extremely rugged. RCA plugs are Roksan designed and made to provide consistent electrical contact over many years and numerous insertions. To achieve this, the contact parts are solid brass machined and gold plated to over 10µ. All conductors are hand assembled and soldered to ensure low impedance connections. This way the high quality of contact achieved is not interfered with any crimped assembly parts used in most RCA plugs.
  
  Click here to see the image of HDC-02A
  
  

• Speaker
  
  HDC-02S
  The HDC-02S high definition loudspeaker cable is designed utilising 95 strands of high purity tinned copper per conductor sleeved in Red and Black PVC and separated and sheathed overall in White PVC with directional markings. The distance between the conductors is important to control the capacitance of the cable. Too much capacitance, inductance and resistance would alter the sound characteristics and thus impede on overall performance. Although it is impossible to eliminate completely the effect of these electrical characteristics, it is important to strike the right balance to provide the optimum connection between amplifier and loudspeaker ensuring low impedance, capacitance and inductance. HDC-02S allows runs of upto 20m per length with little effect on sound quality.
  
  Click here to see the image of HDC-02S
  

• Rmat-5
  Correctly supports the vinyl record and couples it to the record player platter without interfering with its natural state. It is important not to stress the vinyl nor to 'damp' the vinyl in a non-linear fashion.

  Considerable, uniform, yet 'chaotic fashion' fibrous contact of the Rmat-5 with the vinyl ensures a pure, coherent and wide bandwidth sound reproduction with 'micro' detail and real dynamics.
  

  Rmat-5 high performance vinyl record support mat
  PDF 114 Kb
  
  
  

Electronic Stylus Balance

Specifications

• Capacity: 5g
  
• Readability: ±0.001g
  
• Weighing Modes: gramme
  
• Tare range: Tare full capacity
  
• Calibration: Auto calibration using a 5g
  
• Auto off: 120 seconds off
  
• Operation temp: 0 - 40 °C
  
• Display: 4 digit back-light LCD
  
  Electronic Stylus Balance User Manual
  PDF 1552 Kb
  

Two Stage Micro Fibre Record Cleaner



The Roksan Two Stage Micro Fibre Record Cleaner provides
optimum cleaning of your record’s surface and groove.

The front brush ensures general cleaning of the record surface
and the groove while the rear brush cleans the remaining dirt.

Specifications

• Cleaning Element: Two Stage Micro Fibre
  
• Replaceable Fibre Element Kit: 2mm Dense & 4.5mm Open
  
• Replacement kit comprises of a pair of fiber element, recommended replacement intervals depending on the usage, normally every 3 years.
  
  Two Stage Micro Fibre Record Cleaner User Manual
  PDF 859 Kb
  
  

Strobe Disc

• 33 1/3 & 45 RPM Strobe Disc
  These strobe Discs are suitable for all record players are to be used with normal incondesent light of corresponding frequency. The are two versions available:
  
  • 60 Hz mains AC
    
    
  • 50 Hz mains AC
    
    
    

Spirit Level

• Diameter: 30mm
  Hight: 10mm