|
|
|
Platinum ST1308 Stereo Power Amplifier
The
Platinum Stereo Power Amplifier simultaneously delivers a deeper, tighter
wholly controlled bass with a realistic open mid range and detailed,
extended top end.
Fully symmetrical, complimentary circuit design and use of superior
quality components throughout ensure optimum amplification of the signal.
A substantial, quadruple power supply design and ultra low output impedance
with constant power response allow this amplifier to deliver its full
dynamic potential into almost any loudspeaker presenting a wide bandwidth
and grip with negligible distortion.
There
are as many as 4 Toroidal transformers to provide optimum power delivery
with full isolation between the main amplifier circuit and the input
control, logic circuit and signal switching relay power.
Precision timing and enhanced sound staging are hallmarks of this world
class power amplifier.
Specification
Inputs L & R (Switchable RCA, MUTE, XLR Balanced)
Input Impedance 38 k Ohms
Input Sensitivity 700mV RMS
Power Outputs L & R Loudspeaker Binding Posts x2/Channel
Power Supply 1kVA Ultra Low Noise Toroidal Transformer
A further 3 Toroidal Transformers for Logic,
Relay and Balanced Inputs
Current Output >80 Amps Peak to Peak
Output Power >130 Watts, into 8 Ohms
>260 Watts, into 4 Ohms
>420 Watts, into 2 Ohms
Damping Factor >400 (8 Ohms) Up to 30kHz
Frequency Response -3dB, <2Hz >150kHz
Gain 30.7dB
Harmonic Distortion <0.001% 1kHz, <0.008% 20kHz, 10W -
8 Ohms
<0.002% 1kHz, <0.02% 20kHz, 100W - 8 Ohms
Signal to Noise Ratio >116dB (ref. 100W - 8 Ohms)
Power Source 100V 120V 50Hz / 60Hz
220V 240V 50Hz / 60Hz
(via 10A Mains inlet filter)
Power Consumption < 1300 W
Dimension 432 x 390 x 190 (W x D x H) mm
432 x 390 x 210 (including feet)
Weight 30Kg
All specifications
are liable to change without notice. E.& O.E

|